Morbark Beever 2230 20-inch capacity Forestry Chipper
Our versatile, high-performance Beever 2230 20-inch (50.8cm) Forestry Chipper model built heavier in critical wear areas provides optimal performance for in-forestry chipping.
Easily filling a 53′ (16m) trailer and sustaining up to four to five loads per day, this hard-working, aggressive chipper is the perfect option for those looking to enter the biomass market with low startup costs. This machine features the Advantage 3 Drum and electronic flow control to control feed speed from the remote. Tough, abrasion-resistant AR-400 steel is used for the drum skin, replaceable belly band, discharge chute and wear strips beneath the bed chain, providing strength and long wear life.
Like all Morbark equipment, the 2230 Forestry Chipper is a long-lasting, durable machine backed by a world-class parts and service support team.
Infeed Deck:
A 6′ (182.88cm) feed bed with live chain drive, tilted downward at 4° angle, provides efficient feeding of tree-length material.
Remote Control:
Wireless remote with tethered back-up system controls the feed functions, yoke functions, throttle functions, rear stabilizers and hydraulic swivel discharge.
Drum:
The Advantage 3™ drum creates more uniform chips and reduces operating and maintenance costs.
Chassis:
The Beever M20R Forestry Chipper has the heaviest frame among machines in the <20,000 lb. (9,072 kg.) weight range.
Track Undercarriage:
Take the chipper to the material with an optional two-speed 139 ½” (354.33cm) long x 19 ½” (49.53cm) wide track undercarriage and 6 PSI ground pressure.
- TorqMax Plus compression system, hydraulic lift assist, Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and sprocket driven bottom feed wheel
- Directional flow discharge system with 38° horizontal and 17° vertical hydraulic positioning manufactured from 3/8″ (9.5mm) thick abrasion resistant (AR-400) top and sides with ¼” (6.35mm) HR bottom
- Hydraulic front and dual rear stabilisers
- 36″ (91.44cm) diametre x 33 3/8″ (84.77cm) wide drum with front pocket and six Babbitt-style knives with removable knife holders
- Discharge clean out door on bottom
- Steel guard enclosing valve bank and automatic feed system components
- 3-speed feed rate
- Live hydraulic system including: ball valve, pump, motor, and valve bank
- Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection
- Chipping Capacity: 20″ (50.8cm)
- Height: 11′ (335.28cm) – 12′ (365.76cm)
- Width: 7’8″ wheeled (233.68cm) / 8’6″ (259.08cm) tracked
- Length: 25’5″ (774.7cm) wheeled / 22’9″ (693.42cm) tracked
- Gross weight (approximate): 16,900 lbs. (7,665.7kgs) wheeled / 26,540 lbs. (12,038.3kgs) tracked
- Suspension: 20,000 lb. (9,071.8kgs) torsion
- Infeed opening: 65″ (165.1cm) wide x 43″ (109.22cm) high
- Throat opening: 28″ (71.12cm) wide x 20″ (50.8cm) high
- Drum: 33 3/8″ (84.77cm) wide x 36″ (91.44cm) diametre
- Engine: CAT diesel
- Horsepower: 325–400 HP
- Fuel capacity (tank): 65 gallons (246 litres)
- Hydraulic oil capacity: 43 gallons (162.7 litres)
- Frame: 2″ (5.08cm) x 10″ (25.4cm) tubular
- Tyres: (4) 235/75×17 ½”
- Hitch: 3″ (76.2mm) Pintle Ring
- Download M20R forestry chipper brochure
- Mor-Lift Model 150M Knuckleboom Loader with 14′ (426.72cm) extended boom reach and 2,680-lb. (1,215.63kgs) lift capacity at 10′ (304.8cm) reach
- Direction Flow Discharge w/90º horizontal swing
- Axle options available
- Fender options available
- Battery box options available
- Custom paint and logo packages
Make an Enquiry
Contact Us
Melbourne
Global Machinery Sales
24-28 Williams Road, Dandenong South VIC. 3175 Australia
Ph: 1300 072 926
Fax: 03 9791 7676
sales@globalmachinerysales.com.au
Sydney
Global Machinery Sales
49-50 Cassola Place, Penrith, NSW 2750 Australia
Ph: 1300 072 926
Stuart Samson: 0478 351 788
sales@globalmachinerysales.com.au
Queensland
Global Machinery Sales
191 Magnesium Dr, Crestmead QLD 4132 Australia
Ph: 1300 072 926
sales@globalmachinerysales.com.au
About us
Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers, Horizontal Grinders, Log Splitters, Spider Lifts, Mini Loaders and Recycling Equipment from leading brands such as Morbark, Rayco, CMC, Timberwolf and Angry Ant.
Mon-Fri: 8am – 5pm
Follow us
Newsletter
Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.