All Chippers | AAWC4 | RC6D35 | Beever 812 | Beever 1215 | Beever 1415 | Beever 1415 Track | Beever 1621 | Beever 1821 | RC1824 | Beever 2021 | Beever 2230 | 2230 Forestry
Morbark Beever 1821 18-inch capacity Wood Chipper
Our Beever™ 1821 18-inch capacity Wood Chipper is ideal for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity, high-production chipper includes more standard features than any other chipper in its class.
The Beever 1821 Brush Chipper is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access.
The powerful TorqMax™ dual feed wheel compression system generates more than 6,600 lb./ft. (9,822 kg/m) of material pulling force. Many customer-inspired innovations are featured on the 1821 , increasing efficiency and safety while reducing operating and maintenance costs. Unit is pre-plumbed and outfitted for the easy installation of most aftermarket components. Ergonomic infeed design provides consistent feed control bar activation.
Like all Morbark equipment, the 1821 is a long-lasting, durable machine backed by a world-class parts and service support team.
More Info: Morbark Website
Drum:
30″ (76.2cm) diametre four-knife staggered knife-pocket drum with patented removable knife holders and Vortex chambered air-impeller system provides maximum chipping efficiency.
Channel Frame:
The 8.2 lb. (3.72kgs), 6″ (15.24cm) channel frame rails with 2″ (5.08cm) x 6″ (15.24cm) tubular steel frame with cross bracing increases structural strength while maintaining low unit weight.
Reversing Auto-feed:
The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.
Hydraulic Down Pressure:
The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 4,500 lbs. (2,041.17 kgs) of perpetual down pressure.
Track Undercarriage:
Take the chipper to the material with optional 400 mm rubber tracks, 4.84 PSI ground pressure, low-speed travel range of 1.0 MPH (1.6 kph) and high-speed travel range of 1.8 MPH (2.9 kph).
- Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist, Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm coupler
- Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
- 3″ (7.62cm) x 5″ (12.7cm) tubular steel telescoping drawbar with two 12″ (30.48cm) extensions
- Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection
- Chipping capacity: 18″ (45.72cm)
- Height: 8’11” wheeled (271.78cm) / 8’6″ (259.08cm) tracked
- Width: 7’3″ (220.98cm) wheeled / 7’10” (238.76cm) tracked
- Length: 18’1″ wheeled (551.18cm) / 16′ (487.68cm) tracked
- Gross weight (approximate): 8,900 lbs. (4,036.97kgs) wheeled / 13,500 lbs. (6,123.5kgs) tracked
- Suspension: 9,000 lb. (4,082.331kgs) Torflex
- Infeed opening: 56″ (142.24cm) wide x 37″ (93.98cm) high
- Throat opening: 20 ½” (52.07cm) wide x 18″ (45.72cm) high wheeled / 20 ½” (52.07cm) wide x 15″ (38.1cm) high tracked
- Drum: 23 ¾” (60.3cm) wide x 30″ (76.2cm) diametre
- Engine: Cummins diesel
- Horsepower: 170 HP
- Fuel capacity: 32 gallons (121.1 litres)
- Hydraulic oil capacity: 12 gallons (45.4 litres) wheeled / 26 gallons (98.4 litres) tracked
- Frame: 8.2 lb. (3.72kgs), 6″ (15.24cm) channel wheeled / 6″ (15.24cm) x 2″ (5.08cm) x 1/4″ (0.635cm) wall tube
- Tyres : (2) 215/75Rx17 ½” / Rubber track undercarriage
- Hitch: 2 ½” (63.5mm) Pintle
- ChipSafe®Operator Safety Shield
- Winch package: heavy-duty, 5,000 lb. (2267.96kgs) pull capacity with rope and 10′ (304.8cm) chafe guard
- Bottom Bump Bar
- Hydraulic Swivel Discharge
- Cone Holder
- Spare Tyre/Mount
- Folding Infeed Tray
- Flow Control
- Axle Options Available
- Fender Options Available
- Battery Box Options Available
Make an Enquiry
"*" indicates required fields
Contact Us
Melbourne
Global Machinery Sales
24-28 Williams Road, Dandenong South VIC. 3175 Australia
Ph: 1800 025 024
Fax: 03 9791 7676
agent@monitor.net.au
Sydney
Global Machinery Sales
49-50 Cassola Place, Penrith, NSW 2750 Australia
Ph: 1800 025 024
Stuart Samson: 0478 351 788
agent@monitor.net.au
Queensland
Global Machinery Sales
191 Magnesium Dr, Crestmead QLD 4132 Australia
Ph: 1800 025 024
agent@monitor.net.au
About us
Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers and Spider Lifts from leading brands such as Morbark, Rayco, CMC, BG Lifts and Först.
Mon-Fri: 7.30am – 4.30pm
Follow us
Newsletter
Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.