All Chippers | AAWC4 | RC6D35 | Beever 812 | Beever 1215 | Beever 1415 | Beever 1415 Track | Beever 1621 | Beever 1821 | RC1824 | Beever 2021 | Beever 2230 | 2230 Forestry
Morbark Beever 2021 20-inch capacity Wood Chipper
The Beever 2021 20-inch capacity Wood Chipper boasts a huge list of options to customise the machine as well as more standard features than any other chipper in its class. The unit can be outfitted with a four- or six-cylinder diesel engine and choice of single axle, tandem axle or single axle dual wheel package.
With its large capacity and high-production volume reduction capabilities, the Beever 2021 Brush Chipper is perfect for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities.
The dual-sided, chambered air impeller system with controllable air flow vents increases chip throwing velocity and easy discharge of light, leafy material.
Like all Morbark equipment, the 2021 is a long-lasting, durable machine backed by a world-class parts and service support team.
More Info: Morbark Website
TorqMax™ Feed Wheel:
The TorqMax™ dual feed wheel compression system provides more than 7,500 lb./ft. (11,161.22 kg/m) of material pulling force.
Infeed:
The 65″ (165.1cm) wide x 38″ (96.52cm) high infeed chute with 31″ (78.74cm) wide x 20 ½” (52.07cm) high throat opening allows for easy feeding of a variety of materials and reduces saw labour.
Reversing Auto-feed:
The reversing auto-feed system automatically stops forward feed and briefly backs materials away from the drum for optimum engine performance while chipping.
Hydraulic Down Pressure:
The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 10,000 lbs. (4,536 kgs) of perpetual down pressure.
Be Safe. Get ChipSafe.
The ChipSafe® Operator Safety Shield — the latest safety innovation for Morbark Beever™ Brush Chippers. Learn more.
- 23 ½” (59.69cm) wide x 37 3/8″ (94.93cm) diametre, four dual-edged knife staggered-pocket drum with patented EZ Drum removable knife holders, dual-sided, chambered air impeller system and controllable air flow vents
- Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist and Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle.
- Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package.
- 360° manual height-adjustable discharge
- Direct-drive bottom feed wheel
- Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection
- Chipping capacity: 20″ (50.8cm)
- Height: 9’6″ (289.56cm)
- Width (single/tandem axle): 7’7″ (231.14cm)
- Width (single axle dual wheel): 8’5″ (256.54cm)
- Length (single and tandem axle): 21’2″ (645.16cm)
- Gross weight (approx., single axle): 11,000 lbs. (4,990kgs)
- Gross weight (approximate, dual wheel or tandem axle): 12,200 lbs. (5,533.8kgs)
- Suspension: Single Axle: (1) 10,000 lb. (4,535.9kgs) Torflex
- Suspension: Dual Wheel: (1) 12,000 lb. leaf (5,443.1kgs)
- Suspension: Tandem Axle: (2) 8,000 lb. torsion (3,628.7kgs)
- Infeed Opening: 65″ (165.1cm) wide x 38″ (96.52cm) high
- Throat Opening: 31″ (78.74cm) wide x 20 ½” (52.07cm) high
- Drum: 23 ½” (59.69cm) wide x 37 3/8″ (94.93cm) diametre
- Engine (single axle and tandem axle): CAT diesel
- Horsepower (single axle): 215 HP
- Horsepower (tandem axle): 250 HP
- Fuel capacity: 60 gallons (227.12 litres)
- Hydraulic oil capacity: 41 gallons (155.2 litres)
- Frame: 2″ (5.08cm) x 6″ (15.24cm) tubular
- Tyres (single or tandem axle): 235/75Rx17 ½”
- Tyres (dual wheel): 235/80Rx16″
- Hitch: 2 ½” (63.5mm) Pintle
- ChipSafe®Operator Safety Shield
- Folding infeed tray with spring lift assist
- Winch package: heavy-duty, 5,000 lb. (2267.96kgs) pull capacity with rope and 10′ (304.8cm) chafe guard
- Bottom Bump Bar
- Hydraulic Swivel Discharge
- Cone Holder
- Spare Tyre/Mount
- Folding Infeed Tray
- Flow Control
- Axle Options Available
- Fender Options Available
- Battery Box Options Available
- Custom paint and logo packages
Make an Enquiry
"*" indicates required fields
Contact Us
Melbourne
Global Machinery Sales
24-28 Williams Road, Dandenong South VIC. 3175 Australia
Ph: 1800 025 024
Fax: 03 9791 7676
agent@monitor.net.au
Sydney
Global Machinery Sales
49-50 Cassola Place, Penrith, NSW 2750 Australia
Ph: 1800 025 024
Stuart Samson: 0478 351 788
agent@monitor.net.au
Queensland
Global Machinery Sales
191 Magnesium Dr, Crestmead QLD 4132 Australia
Ph: 1800 025 024
agent@monitor.net.au
About us
Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers and Spider Lifts from leading brands such as Morbark, Rayco, CMC, BG Lifts and Först.
Mon-Fri: 7.30am – 4.30pm
Follow us
Newsletter
Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.