All Chippers | AAWC4 | RC6D35 | Beever 812 | Beever 1215 | Beever 1415 | Beever 1415 Track | Beever 1621 | Beever 1821 | RC1824 | Beever 2021 | Beever 2230 | 2230 Forestry
Morbark Beever 1621 16-inch capacity Wood Chipper
The Beever 1621 16-inch capacity Wood Chipper is ideal unit for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity chipper is now on a compact, lighter weight design platform.
The 8.2 lb. (3.72kgs), 6″ (15.24cm) channel frame rails increases structural strength while maintaining low unit weight. With the powerful TorqMax™ dual feed wheel compression system — the 32.3ci hydraulic motor generates more than 3,400 lb./ft. (5,060 kg/m) of material pulling force — and 18″ (45.7cm) diameter dual feed wheel with straight flow-through infeed design, the 1621 provides powerful and efficient chipping action.
Hydra-Lift dual feed wheel compression system with spring-assisted down pressure provides more than 1,500 lbs. (680.38kgs) of material crushing power. The patented chambered air impeller system increases chip throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck. Like all Morbark equipment, the Beever 1621 is a long-lasting, durable machine backed by a world-class parts and service support team.
More Info: Morbark Website
TorqMax™ Feed System:
The powerful TorqMax™ top feed wheel compression system generates more than 3,400 lb./ft. (5,060 kg/m) of material pulling force.
Infeed System:
The wide infeed opening with 18″ (45.7cm) diameter dual feed wheel and straight flow-through infeed easily climbs over material, reduces drag and increases chipping efficiency.
Channel Frame:
The 8.2 lb. (3.72kgs), 6″ (15.24cm) channel frame rails with 2″ (5.08cm) x 6″ (15.24cm) tubular steel frame with cross bracing increases structural strength while maintaining low unit weight.
360° Swivel Discharge:
360° degree hydraulic manual crank swivel discharge chute with adjustable height puts chips right where they’re needed without removing the Beever from the tow vehicle.
Be Safe. Get ChipSafe.
The ChipSafe® Operator Safety Shield — the latest safety innovation for Morbark Beever™ Brush Chippers. Learn more.
- 23 ¾” (60.3cm) wide x 21 3/8″ (54.3cm) diametre staggered-knife pocket drum with two dual-edged chipper knives and dual-sided, chambered air impeller systems
- Single (top) horizontal feed wheel with TorqMax top feed wheel compression system, hydraulic lift assist, spring assisted down pressure and manually applied hydraulic down pressure at the valve handle
- Reversing automatic feed system
- Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
- Fuel tank sight gauge, drain plug and shutoff valve
- Hydraulic tank shut-off valve, drain plug and clean-out cover
- Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection
- Chipping capacity: 16″ (40.64cm)
- Height: 8’10” (269.24cm)
- Width: 6’11” (210.82cm)
- Length: 16’5″ (500.38cm)
- Weight (approximate): 7,200 lbs. (3,265.86kgs)
- Suspension: 7,000 lb. Torflex (3,175.15kgs)
- Infeed opening: 55 ½” (140.97cm) wide x 34″ (86.36cm) high
- Throat opening: 20 ½” (52.07cm) wide x 16″ (40.64cm) high
- Drum: 23 ¾” (60.32cm) wide x 21 3/8″ (54.29cm) diametre
- Engine: CAT diesel
- Horsepower: 142 HP
- Fuel capacity (tank): 32 gallons (121.13 litres)
- Hydraulic oil capacity: 13 gallons (49.21 litres)
- Frame: 8.2 lb. (3.72kgs), 6″ (15.24cm) channel
- Tyres: (2) 215/75Rx17 ½”
- Hitch: 2 ½” (63.5mm) Pintle Ring
- ChipSafe®Operator Safety Shield
- Winch package: heavy-duty, 5,000 lb. (2267.96kgs) pull capacity with rope and 10′ (304.8cm) chafe guard
- Custom paint and logo packages
- Bottom Bump Bar
- Hydraulic Swivel Discharge
- Cone Holder
- Spare Tyre/Mount
- Folding Infeed Tray
- Bottom Feedwheel
- Flow Control
- Axle, Fender and Battery Box Options Available
Make an Enquiry
Contact Us
Melbourne
Global Machinery Sales
24-28 Williams Road, Dandenong South VIC. 3175 Australia
Ph: 1800 025 024
Fax: 03 9791 7676
agent@monitor.net.au
Sydney
Global Machinery Sales
Unit 1/21 Penny Place, Arndell Park NSW. 2148 Australia
Ph: 1800 025 024
Stuart Samson: 0478 351 788
agent@monitor.net.au
About us
Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers and Spider Lifts from leading brands such as Morbark, Rayco, CMC, BG Lifts and Först.
Mon-Fri: 7.30am – 4.30pm
Follow us
Newsletter
Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.