All Chippers | AAWC4 | RC6D35 | M8D | RC1220 | M12RX | M12R | M12R Track | RC1522G | M15RX | M15R | RC1824 | M18RX | M18R | M20R | M20R Forestry

Morbark M18RX 18-inch capacity Wood Chipper

While retaining an 18″ (45.72cm) chipping capacity, the Beever M18RX Wood Chipper weighs in at less than 4,535.9 kgs (GVWR), eliminating the need for additional transport licensing requirements (dependent on options chosen).

Infeed is made with 7-gauge (5 mm), XF-100 sides and 3/8″ (10 mm) thick, XF-100 floor to increase material tensile strength with lighter weight components.

Ideal for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities, this chipper combines Morbark strength in a more compact design.

Like all Morbark equipment, the M18RX is a long-lasting, durable machine backed by a world-class parts and service support team.

Morbark M18RX Wood Chipper

Infeed:
Oversized perimeter opening with large throat opening, radius infeed walls and straight flow through infeed design increases efficiency while reducing infeed wear.

Morbark M18RX Wood Chipper

Pivot Assembly:
Bearing-style yoke pivot assembly with TorqMax™ drive and Variable Force™ down pressure system increases down pressure efficiency by 25%.

Morbark M18RX Wood Chipper

Reversing Auto-feed:
The reversing auto-feed system automatically stops forward feed and briefly backs materials away from the drum for optimum engine performance while chipping.

Morbark M18RX Wood Chipper

Separate Fluid Tanks:
7-gauge split fuel and hydraulic reservoirs with shut-off valves reduce risks of vibration damage and cross-contamination while allowing for easy maintenance.

Morbark M18RX Wood Chipper

Be Safe. Get ChipSafe.
The ChipSafe® Operator Safety Shield — the latest safety innovation for Morbark Beever™ Brush Chippers. Learn more.

  • Four dual-edged knife staggered-pocket drum with removable knife holders
  • Vortex chambered air impeller system and controllable air flow vents
  • Top 20 ½” (52.07cm) wide horizontal feed wheel equipped with serrated teeth and knife bars
  • 360° manual crank swivel discharge with adjustable height and chip deflectors
  • Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
  • 4″ (10.16cm) x 6″ (15.24cm) tubular steel fixed-length drawbar and 3/8″ (9.5mm) thick safety chains with clasp hooks
  • Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
  • Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection

  • Chipping capacity: 18″ (45.72cm) 
  • Height: 9’4″ (284.48cm) 
  • Width: 7’8″ (233.68cm) 
  • Length (Transport): 18’3″ (556.26cm) 
  • Gross weight (approximate): 9,550 (4,331.8kgs)– 11,500 lbs. (5,216.3kgs)
  • Suspension: 10,000 lb. (4,535.9kgs) Torflex
  • Infeed Opening: 65″ (165.1cm) wide x 38″ (96.52cm) high
  • Throat Opening: 21 ¼” (53.97cm) wide x 19″ (48.26cm) high
  • Drum: 23 ½” (53.975cm) wide x 37 ½” (95.25cm) diametre
  • Engine: Cummins diesel
  • Horsepower: 170 HP
  • Fuel capacity: 44 gallons (166.6 litres)
  • Hydraulic oil capacity: 26 gallons (98.4 litres)
  • Frame: 8.2 lb. (3.7kgs), 6″ (15.24cm) channel
  • Tyres: (2) 235/75×17 ½”
  • Hitch: 2 ½” (6.35cm) Pintle 

Video coming soon!

  • ChipSafe®Operator Safety Shield
  • Winch package: heavy-duty, 5,000 lb. (2267.96kgs) pull capacity with rope and 10′ (304.8cm) chafe guard
  • Custom paint and logo packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Spare Tyre/Mount
  • Folding Infeed Tray
  • Flow Control
  • Axle, Fender and Battery Box Options Available

Make an Enquiry

    Your Name

    Your Email

    Your Company

    Your Phone

    Your Location

    I would like to enquire about the ...

    How did you hear about us?

    What is your enquiry?

    Tick below if you wish to receive exclusive offers from Global Machinery Sales.

    Yes, I would like to.

    Contact Us

    Melbourne

    Global Machinery Sales
    24-28 Williams Road, Dandenong South VIC. 3175 Australia
    Ph: 1800 025 024
    Fax: 03 9791 7676
    agent@monitor.net.au

    Sydney

    Global Machinery Sales
    Unit 1/21 Penny Place, Arndell Park NSW. 2148 Australia
    Ph: 1800 025 024
    Stuart Samson: 0478 351 788
    agent@monitor.net.au

    Request a Demo
    Enquire about Finance

    About us

    Global Machinery Sales supplies the Arbor, Forestry, Access and Farming Industries with quality Wood Chippers, Stump Grinders, Forestry Mowers and Spider Lifts from leading brands such as Morbark, Rayco, CMC, BG Lifts and Först.

    Mon-Fri: 7.30am – 4.30pm

    Follow us

    Newsletter

    Subscribe to our newsletter to stay up-to-date on all the latest industry news, our news and to receive exclusive offers.

      Your Name (required)

      Your Email (required)

      Which Number is Bigger 1 or 10? (required)

      Click edit button to change this text.